Telemetry devices approved for non-urban metering
The list below shows Local Intelligence Devices (LIDs) that meet NSW non‑urban metering requirements. Only the specific versions listed have been approved. Any other version will need to be assessed before it can be confirmed as compliant. These approved LIDs are currently in production or available to purchase.
| Make and model | Distributor | Firmware version | Pulse/Modbus | Suitable to multiple meters | Support details and design documents |
|---|---|---|---|---|---|
| Meterwatch | Halytech Pty Ltd | Version 1.97 | Pulse | ✕ | Phone: (Sales/Support) 02 8814 5235 Email: sales@halytech.com.au or support@halytech.com.au Webpage: halytech.com.au |
| Halytech microSpider meterwatch Modbus | Halytech Pty Ltd | Version 1.97 | Modbus | ✕ | Phone: (Sales/Support) 02 8814 5235 Email: sales@halytech.com.au or support@halytech.com.au Webpage: halytech.com.au |
| FlowPRO Multipoint Monitoring System CR300-CELL220 | Campbell Scientific Australia | OS 10.05 | Supports both pulse and Modbus | ✔ | Phone: (07) 4401 7700 Email: info@campbellsci.com.au Webpage: https://www.campbellsci.com.au/telemetry-solutions |
| AquaLID | Electrical Systems Engineering | 1.03 | Modbus | ✕ | Phone: (08) 9302 2932 Email: enquiries@electricalsystems.com.au Webpage: https://www.electricalsystems.com.au/ |
| Captis Recharge V1.2 Model: MC841232AU010 | Kallipr | 1.32.0 | Supports both pulse and Modbus | ✕ | Phone: 1800 646 828 Email: support@kallipr.com Webpage: https://kallipr.com/contact-us/ |
| Captis Pulse V1.2 Model: MC401232AU010 | Kallipr | 1.32.0 | Pulse | ✕ | Phone: 1800 646 828 Email: support@kallipr.com Webpage: https://kallipr.com/contact-us/ |
If you are looking for a discontinued LID, go to: Non-urban metering resource hub
Can non-urban metering LIDs be used for floodplain harvesting measurement?
Non-urban metering LIDs can be used for floodplain harvesting where the point of intake measurement method applies.
For more information, visit the floodplain harvesting measurement webpage or contact the metering and measurement team at: metering@dcceew.nsw.gov.au